Differences

This shows you the differences between two versions of the page.

--- programs:valve_programs [2023/09/12 07:56] – [Trouble Shooting] marilisebester_gmail.com
+++ programs:valve_programs [2025/01/20 07:09] (current) – [Scheduling] marilisebester_gmail.com
@@ Line 2: / Line 2: @@
 =====Trouble Shooting=====
-If the valve program does not want to save & give an error "Station has not been able to sync successfully", check if both Farmsync hotspots are available, if not, do a power cycle. Make sure that you remove the power from any external router that might be in the office as well.
+If the valve program does not want to save & give an error "Station has not been able to sync successfully"
+  * Signal Strength might not be strong enough to sync succesfully, just keep on trying to save until succesful.
+  * If still not succesfull, check if both Farmsync hotspots are available, if not, do a power cycle.
+  * What is a "Power Cycle"? - When you remove the ALL power from the Farmsync Controller AND any external router that might be in the office, and then reconnect
+  * Please note that it will take a few minutes for all the controllers to come back online.
 =====Limits=====
@@ Line 13: / Line 17: @@
 {{ :programs:valve_details.png?nolink&400|}}
   * **A:** Enter a name for the program
@@ Line 66: / Line 69: @@
   * **E:** Tick the Days of the Week that the program must run on
-====Auto Scheduling====
+**Ammendment**
+{{ :programs:auto_schedule.png?nolink&400 |}}
+  * **A** If a program is running and a new schedule is sent from AgriWiz, this setting will stop the current irrigation and reset the schedule so that the new schedule can populate
+  * **B** Late Start  (Loadshedding) if the schedule has fallen behind allow it the catch up  (will only work if there is enough hours left in the day).
+  * **C** Force Stop  ( If the schedule is running behind and the next schedule must start this wil Stop the program and reset the schedule so that the next schedule can start (WILL LOSE THE Irrigation Time that was left)
+====Auto Scheduling====
+- Only when using 3rd party schedulers
 {{ :programs:auto_scheduling.png?nolink&400|}}