Control - Valves

A:Station Name
B:Use the Drop-down to Expand & Collapse to show the Valves connected to related Station
C:Valve Name
D:Expected Flow Rates - displays the Expected Flow Rate as specified in Set-up_Manage Valves
E:Current Flow Rate - displays the Actual Flow Rate as received from water meter
F:Current State of the Valve
1. OPEN
2. CLOSED
3. PENDING CLOSED
4. POWER UP FAILED
  1. Battery Voltage under 3.6V
  2. Battery connector faulty connection
  3. Battery Life Span reached - replace
5. NOT DETECTED
  1. Signal sent but not received
    1. Solenoid connection faulty
    2. Solenoid faulty
G:Manually OPEN & CLOSE valves
1. Please note, there is no time associated with this function. Should you want to irrigate for 60min only, you will have to remember to CLOSE the valve on the program again by hand.